© 2006, Legacy Bronze
Double Faced Tape
Double faced tape is provided upon request. Due to the many varieties of adhesives and
wall surfaces, as well as the weight of the etched plaque, testing is recommended before
specifying double faced tape on etchings.
Threaded studs are recommended for concealed mounting to solid walls. Bonding cement
or silicone adhesive secures the studs within the drilled holes. Standard length for
threaded studs is 1-1/2". Custom lengths are available.
Hidden Mount (Studs)
If the etched plaque is 1/4" or thicker, the back of the etching
is drilled and tapped. If the plaque is less than 1/4" thick,
studs are spot-welded on the back. Studs not recommended
on material 1/16" thick or less due to "dimpling" on the etching
face.
Adhesive/Silicone Mount
Silicone adhesive may be provided if specified for etched
plaques. This is an effective mounting method for etched
plaques, although is best when combined with double-faced
tape.
Holes Through Face
Any etched plaque can be provided with holes through the
face for mechanical fasteners if requested. Please specify
type of fastener, location and size of holes, and whether or
not the holes must be countersunk. Hardware can be
provided upon request. Specify screw type, material, size,
length, head style and finish.
