Both cast bronze and cast brass letters are protected with a clear protective coating prior to
shipping, however, cast brass is not recommended for exterior use.
Although casting alloys of aluminum can be anodized, because of the inherent nature of the
sand casting process, an anodized finish is not recommended for cast products.
Cast letters are manufactured using sand molds in our state-of-the-art foundry from raw ingot
alloyed in the following materials:
Cast Bronze
Equivalent to Copper Development
Association Alloy C92200;
88% copper, 6% tin, 4% zinc, 2% lead.
Yellow Brass 70/30
Alloy # 406; 58% copper,
40% zinc, less than 1 % each
tin and lead.
Aluminum - Anodized Finishes
Standard: conforms to Alloy 304
Optional: conforms to Alloy 316
Standard sized sheet 48" x 96
Aluminum - Satin or
Baked Enamel Finishes
Cast from Aluminum Association
Alloy Designation C443.2.
© 2006, Legacy Bronze
Cast and Waterjet-cut Letters:
Waterjet-Cut Letters
We can produce waterjet-cut metal letters in virtually any letterstyle using electronic
artwork. Waterjet-cut letters have sharp inside corners and more precise details than
router-cut or cast metal letters. A wide range of materials and finishes provide numerous
design options for dimensional letters.
Commercial Bronze, 90/10
Copper Development Association
Alloy C22000; 90% Copper, 10% Zinc
Standard sized sheet 48" x96"
Stainless Steel
Standard: conforms to Alloy 304
Optional: conforms to Alloy 316
Standard sized sheet 48" x 96
Copper
Development Association
C11000
Standard sized sheet 48" x 96"
