Edges:
Shapes:
Square or rectangular shapes are standard on etchings. However, optional oval, round or
other shapes can be produced.
An optional edge is a machine bevel. Our standard
bevel is 45° and is applied to one half the material
thickness. A bevel the full thickness of the material
is not recommended due to sharp edges. Bevel
edges on 1/16" thick metal are not available.
Straight Edge
Borders on an etched plaque can refer to either the edges or corners in addition to an actual
etched border. In addition to square and rectangular sizes, etched plaques can be machined
and/or cut into a variety of shapes to fit into almost any design environment.
The standard edge treatment on
an etched plaque is a square
edge (90°).
Radius Corners
Available in 1/8", 1/4", 5/16", 3/8", and 1/2".
Unless a particular radius is specified, we
will determine the appropriate radius for the
plaque.
Beveled Edge
© 2006, Legacy Bronze
Nipped Corners
Available in 1/8", 3/16", 1/4", 3/8", and 1/2".
Unless a particular nipped size is specified,
we will determine the appropriate size for
the plaque.
Irregular shape cut-outs
A shape without straight edges is
considered an irregular shape.
Corners:
